Grizzly 1008 User Manual

-3-

Safety Instructions For Power Tools

SECTION 1: SAFETY

KEEP CHILDREN AND VISITORS
AWAY. All children and visitors should be
kept a safe distance from work area.

6. MAKE WORK SHOP CHILD PROOF with

padlocks, master switches, or by removing
starter keys.

7. DON’T FORCE TOOL. It will do the job

better and safer at the rate for which it was
designed.

8. USE RIGHT TOOL. Don’t force tool or

attachment to do a job for which it was not
designed.

1. KEEP GUARDS IN PLACE and in working

order.

2. REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning on.

3. KEEP WORK AREA CLEAN. Cluttered

areas and benches invite accidents.

4. DON’T USE IN DANGEROUS ENVIRON-

MENT. Don’t use power tools in damp or
wet locations, or where any flammable or
noxious fumes may exist. Keep work area
well lighted.

For Your Own Safety Read Instruction

Manual Before Operating This Equipment

Indicates an imminently hazardous situation which, if not
avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoid-
ed, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoid-
ed, MAY result in minor or moderate injury. It may also be
used to alert against unsafe practices.

This symbol is used to alert the user to useful information
about proper operation of the equipment.

The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words which are intended to convey the level
of importance of the safety messages. The progression of symbols is described below.
Remember that safety messages by themselves do not eliminate danger and are not a substi-
tute for proper accident prevention measures.

G1004/1008 Vertical Milling Machine

NOTICE