Echo PE-225 User Manual

1.  Close choke and remove air filter cover.

2.  Place inner throttle cable in large hole of carburetor swivel (A). 
3.  Loosen nuts (B) and place threaded end of throttle linkage in 

bracket slot. Finger tighten nuts (B).

4.  Check throttle for freedom of movement and that wide open 

throttle / low idle extremes are adjusted properly. If adjustment 

cannot be achieved with adjusting nuts (B), consult with your Echo 

Dealer for correct adjustment procedure. Tighten nuts (B).

5.  Connect 2 ignition stop leads (C,D) from throttle cable tubing to 2 

ignition leads (C,D) on engine.

6.  Gather ignition wires and position in clip (E) behind air filter case. 

7.  Install air filter and cover.