Echo PE-225 User Manual

Tools Required:    13 mm wrench, grease gun P/N 91016, clean rag

Parts Required:    POWER BLENDX

TM

 8 oz. (P/N 91014) or Lithium 

Base Grease

1.  Remove plug (A) and grease gear housing.  Do not over-fill.

2.  Replace plug and tighten securely.   

Tools required:   Torx T27 L-Wrench, Clean rag

Parts Required:   POWER BLENDX

TM

 8 oz. (P/N 91014) or Lithium    

 

 

 

Base Grease.

1.  Loosen two (2) screws (A) and remove center locating screw (B).   

Pull gear box and shield from drive shaft housing.

2.  Pull flexible cable from the drive shaft housing, wipe clean and  

recoat with a thin coating [15 ml (1/2 oz.)] of grease.

3.  Slide the flexible cable back in the drive housing.  DO NOT get  

dirt on the flex cable.

4.  Install the gear housing and shield assembly.

5.  Tighten screws securely.