Marshall electronic OR-841-HDSDI User Manual

■  TimeCode

Selects among to following options: OFF / LTC / VITC1 / VITC2. In the most cases, the value of LTC and 

VITC1 will be identical to each other.

■  Power Save

  •  When enabled, the monitor will go to sleep after a predefined time has passed when loss of picture occurs.

  •  When a valid video format is detected, the monitor will wake up from the sleep state.

  •  Pressing any front panel keys will wake up the monitor.

  •  In the sleep state, all lights (including the backlight and front key indicators) are turned off.

  •  Any change in parallel remote status will wake up the monitor.

  •  Tally status is not affected by sleep mode.

■  Key Lock

When it is locked, user cannot use front panel keys except for accessing the menu.

■  Reset to MFG Default

   

•  This will Restore all configuration values and functions to the factory preset state.

   

•  This will not change Model Name, Serial Number, or White Balance Data.

   

•  Requires Confirm action by selecting Confirm again.

   

   (Select Reset -> RotoMenu control -> Select Confirm -> Press RotoMenu control)

   

•  Resetting default will not effect backed up data.

■  Backup User Configuration

 

  •  This command backs up all user information to secondary EEPROM (User settings)

 

  •  Requires Confirm action by selecting Confirm again.

 

     (Select Backup -> Press RotoMenu control -> Select Confirm -> Press RotoMenu control)

■  Restore User Configuration

 

• This will Restore all configuration values and functions to the factory preset state. 

 

• This will not change Model Name, Serial Number, or White Balance Data. 

 

• Requires Confirm action by selecting Confirm again. (Select Reset -> Press the RotoMenu control ->    

 

   Select Confirm ->  Press Enter the ROTO-Menu control) 

 

• Resetting default will not effect backed up data. 

■ Backup User Configuration 

 

• This command backs up all user information to secondary EEPROM (User settings) 

 

• Requires Confirm action by selecting Confirm again. (Select Backup -> Press the RotoMenu control ->  

 

  Select Confirm -> Press Enter the RotoMenu control)