Emerson P/N 400518-02 User Manual

54

Epsilon EP-I Indexing Drive and FM-2 Indexing Module Reference Manual

In the application shown above we will assume that the motor can only move in the positive (+) direction. The Home Sensor 
input can be triggered by any one of the spacer lugs on the belt. If the Home Sensor input is active when the device receives 
a Home Initiate, the motor would move forward off the sensor and continues on until it finds the rising edge of the next Home 
Sensor input.

The Home Initiate input function is used to initiate the home function. The Home is initiated on the rising edge of this input 
function. The device will not initiate a Home if there is an Index or Jog in progress or if the Stop input function is active or 
if a travel limit is active.

This input function defines the sensor used for homing. It is required if you are homing to a sensor. This function is edge 
sensitive. The sensor position is determined when the Home Sensor Input Function is activated.

If the device receives a Home Initiate input while the Home Sensor input is active, you can choose to have the motor “back-
off” of the home sensor before it initiates the home function.

If debounce is used on the Home Sensor Input Function, the debounce determines the length of time the input must be active 
to be considered a valid input. The rising edge of the sensor is still used for the reference position. This maintains accuracy 
while providing the ability to ignore false inputs.

This input function is used to manually define the home position using an input function. When this input function is 
activated, the command and feedback positions will be set to zero. The Absolute Position Valid output function is activated 
by the Define Home input function.

This output function is used to indicate that a home cycle has been successfully completed. This output function is deactivated 
when any Index, Home, or Jog is initiated.

NT M

oto

r