Sony XR-M500R User Manual

Page of 170
11
Cassette Player
Listening to a tape
1
Press (OPEN/CLOSE) of the card remote
commander and insert a cassette.
Playback starts automatically.
2
Press (OPEN/CLOSE) of the card remote
commander to close the front panel.
If a cassette is already inserted, to start
playback, press (SOURCE) repeatedly until
“FWD” or “REV” appears.
Tip
To change the tape‘s playback direction, press
(MODE) (o).
To
Press
Stop playback
(OFF)
Eject the cassette
(OPEN/CLOSE) then Z
Fast-winding the tape
During playback, press and hold
m
 or M.
To start playback during fast-forwarding or
rewinding, press (MODE) (o).
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press . or >
momentarily for each track you want to
skip.
You can skip up to nine tracks at one time.
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds
— there is noise between tracks
— there are long sections of low volume or quiet
sections.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 23.)
The side facing up is played.
The side facing down is played.
M
 :
Fast-forward
m
 :
Rewind
>
 :
To locate
succeeding
tracks
.
 :
To locate
preceding
tracks
SEEK
SEEK
DISC
DISC
SOURCE
SEEK
SEEK
DISC
DISC
SOURCE