Panasonic SC-VK960 User Manual

Page of 40
35
RQTV0239
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
REFERENCE
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the 
remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
Power 
Page
No power.
•  Insert the AC power supply cord securely.
8
The unit is automatically 
switched to the standby 
mode.
•  The unit was switched to standby by the sleep timer or auto-off function. 
13, 32
Unresponsive or inoperable function
No response when buttons 
are pressed.
•  This unit cannot play discs other than the ones listed in these operating 
instructions. 
•  Some operations may be prohibited by the disc. 
•  The unit may not be operating properly due to lightning, static electricity or 
some other external factor. Turn the unit off then back to ON. Alternatively, turn 
the unit off, disconnect the AC power supply cord, and then reconnect it.
•  Condensation has formed: Wait 1 to 2 hours for it to evaporate. 
11

No operations can be 
performed with the remote 
control.
•  Check that the batteries are installed correctly. 
•  The batteries are depleted: replace them with new ones. 
•  Aim the remote control at the remote control sensor and operate. 
•  The remote control and main unit are in different modes. 
  Change the remote control mode to match the main unit mode.
10
10
10, 12
33
Cannot play DVDs.
•  CD MODE is on. Press and hold [–CD MODE] to turn CD MODE off. 
16
No picture or sound.
•  Check the video or audio connection. 
•  Check the power or input setting of the connected equipment. 
•  Check that the disc has something recorded in it. 
8, 9

You have forgotten your 
ratings password.
Reset all the settings to 
Factory Preset. 
•  While stopped and “DVD/CD” is the source, press and hold [ , STOP] on 
the main unit and [ 10] on the remote control until “Initialized” or “Initialised” 
disappears from the television.
  Turn the unit off and on again.
  All settings will return to the default values.
Other products respond to 
the remote control
•  Change the remote control operating mode.
33
Specifi c operation undesirable or unexpected
It takes time before play 
starts. 
•  Play may take time to begin when an MP3 track has still picture data. Even after 
the track starts, the correct play time will not be displayed. This is normal. 
•  This is normal on DivX video. 
Folders deeper than the 
eighth layer on a data disc 
are not displayed correctly. 
 
 
 
 
•  Folders deeper than the eighth layer are displayed as the eighth layer.
A menu screen appears 
during skip or search. 
•  This is normal for Video CDs.
Playback control menu 
doesn’t appear. 
 with 
playback control
• Press [ ] twice and then press [ , DVD/CD].
The program and random 
play functions do not work. 
•  These functions do not work with some DVD-Videos.
Programmed items are not 
played. 
•  Some items cannot be played even if you have programmed them.
Scenes are skipped 
intermittently. 
 
•  If you change the volume or sound fi eld/quality setting during “Advanced Disc 
Review”, the function continues without the on-screen display. 
  Press [ , DVD/CD] to cancel “Advanced Disc Review”.
21
Subtitle
Subtitle position is wrong.
•  Adjust the position. (“Subtitle Position” in the Display Menu)
21
No subtitles.
•  Display the subtitles.
•  Subtitles may not be displayed depending on the disc.
20
RQTV0239_1L.indd   35
RQTV0239_1L.indd   35
6/12/07   12:36:53 PM
6/12/07   12:36:53 PM