Phoenix Gold TI265CS User Manual

© 2012 Phoenix Gold • www.phoenixgold.com  

Ti265cs Owner’s Manual

Specifications:

Ti265cs

RMS Power Handling

125 watts

PEAK Power Handling

250 watts

Nominal Impedance

4 ohms

FEATURES:
• 20mm Silk Dome Tweeter
• Fully Machined Aluminum Tweeter Housing
• Poly Treated Paper Cone
• Smooth Termination Dual Roll Rubber Surround
• Powder Coated Stamped Steel Basket
• Custom Tooled Crossover Housing with Direct Wiring Connections
• Audiophile Crossover with Tweeter and Midbass Adjustments
• Continuous Play Tweeter Protection Circuitry
• Integrated Aluminum Dust Cap
• Interwoven Tinsel Leads
• High Temperature CAE/CAD Motor Structure

1. Find a proper mounting location that is flat and has a mounting depth 
clearance of roughly 15mm.
2. Cut a 43mm mounting hole in the door panel or mounting baffle.
3. Mount and secure the tweeter to the door panel or baffle using the 
threaded retaining nut. 
4. Connect the tweeter wires to the crossover. 

Note on Fully Active Crossover Systems: For the best performance we 

always recommend the use of the provided passive crossovers with an 

external high pass electronic crossover usually located on the amplifier 

or headunit. The passive crossover design is extremely complex as 

it “blends” and “smoothes” the tweeter and midrange’s response and 

impedances together. 
Running the system fully active with an external electronic crossover 

(instead of the passive crossovers) for the tweeter and midrange 

eliminates all this smoothing and transitional circuitry. The reality is that it 

almost guarantees worse performance unless the system is perfectly EQ’d 

with precision crossover points. It also eliminates the tweeter protection. 

Unless you are sound quality and tuning expert, using the provided 

crossovers will deliver the best performance.