Radio Shack 10 Disc CD Changer User Manual

14

If you are mounting the CD changer
vertically, use a screwdriver to
remove the screws on both sides of
the CD changer from 

 and turn

 to 

 on

both sides, then replace the screws
into 

.

Caution: If you do not set 

 on both sides of

the CD changer to the correct
mounting axis, the CD changer
might skip during play.

2. Use a medium-sized screwdriver to

attach the supplied mounting brack-
ets to the sides of the CD changer.

3. Using the supplied mounting studs

as templates and the width between
the mounting brackets as a guide,
mark the positions for the mounting
holes.

4. Attach the mount-

ing studs to the
mounting surface
using the supplied
screws.

5. Attach the CD changer to the

mounting studs using the supplied
nuts.

Use the supplied screws to attach the
Audio Adapter under the vehicle’s dash-
board.

Use cable ties (not supplied) to secure
the Audio Adapter‘s wires under the ve-
hicle’s dashboard.

CHA

NGE

R

10-C

D

RadioS

hack

12-2182.fm  Page 14  Friday, September 3, 1999  7:31 AM