Sony VGP-XL1B Manual

10

VGP-XL1B User Guide

The installation process consists of the following steps.

Before connecting your VGP-XL1B CD/DVD Changer/Recorder to 
the host computer, consider the environment in which it will be 
placed. Listed below are some general guidelines.

•

Do not set up the VGP-XL1B in the following locations:
- in direct sunlight

 

- near a magnet or a item that generates a magnetic field

 

- areas with high heat, such as near a heater

 

- areas with excessive heat, dust, and humidity

 

- areas with poor ventilation 

Please observe the following items to avoid damage. 

•

Always turn off the power before the Changer/Recorder is 
moved. Damage may be caused to the changer if the device is 
transferred or moved with the power on. 

•

Do not move the Changer/Recorder if there are discs inside the 
carousel. Remove all discs from the changer before moving.

•

Do not tip or hit this device. Even a slight vibration or small 
impact may cause a disc to come loose or cause damage to the 
discs or carousel. 

•

Do not set up where it is not physically secure. 

•

Do not obstruct the ventilation holes or place heavy objects on 
top of the device.

•

If the host computer and the Changer/Recorder are placed in 
an enclosed cabinet, make sure there is sufficient airflow.

Review the section titled 

.

Install the Changer Software CD on the host computer.

Connect the VGP-XL1B to the host computer.