Hunter Fan Model 30550 Leaflet

Form# 44103-01

20110706

English

Desktop

Owner’s Guide

Model

30550

Air Purifier

1. This Air Purifier is designed for use on a flat, level surface and

may not work properly on an uneven surface. ALWAYS place

this Air Purifier on a firm, level surface. ALWAYS place the Air

Purifier at least six (6) inches away from walls and three (3) Ft.

from heat sources such as stoves, radiators, or heaters.

2. Place the Air Purifier in an area that is out of the reach of

children.

3. Before using the Air Purifier, extend the cord and inspect for

any signs of damage. DO NOT use the product if the cord has

been damaged.

4. ALWAYS UNPLUG the Air Purifier when it is not in operation,

while the filter is being changed, and while it is being cleaned.

5. DO NOT tilt or move the Air Purifier while it is in operation.

Shut off and unplug before moving.

6. DO NOT immerse the Air Purifier in water as permanent

damage will occur. Refer to and follow the MAINTENANCE

instructions.

7. DO NOT run the ionizer if tobacco smoke, air fresheners,

dripless wax candles, or grease from cooking is present.

Save These Important Instructions

SAFETY INSTRUCTIONS

OPERATION

4. Turn the unit on or off by pressing the button. The ring

around it will glow green when the unit is on and red after

being shut off. When you press the ionizer button the ring

around it will glow blue when on, and will stay off when the

ionizer is off.

FILTER REPLACEMENT

1. Unplug the unit and turn it over.
2. Remove the door covering the filter and UV bulb by pushing

down on the arrow and sliding the door out.

3. Lift the filter out of the unit and replace it with a new one.
Note: The new filter should be positioned with the arrow next to

“Airflow Direction” facing the main part of the unit.
4. Slide the door back in place until it “locks” into place.
The filter should be replaced on average every 6 months

depending on use. DO NOT try and replace the UV bulb.

Direction” facing the main part of the unit.

3. Plug the DC adapter into the back of the unit then into a wall

outlet.

irec

tio
n

ow Direc

tion

1. Remove the desktop purifier from its packaging and set it on a

flat surface.

2. Open the filter door and remove the plastic bag around

the filter. Replace the filter with the arrow next to “Airflow