Panasonic PV-GS9 User Guide

Page of 84
10
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Before Use
Quick Guide
•  Before use, fully charge the Battery.
•  Since the Battery will not be charged when the DC 
Cable is connected to the AC Adaptor, disconnect 
it from the AC Adaptor.
•  The [POWER] Lamp and [CHARGE] Lamp light 
up, and charging starts.
•  When the [CHARGE] Lamp goes off, charging is 
completed.
1  Attach the Battery to the AC Adaptor and 
charge it.
2  Attach the charged Battery to the Camcorder.
1  Slide the [OPEN/EJECT] Lever 
1
 toward the 
front and pull down to fully open the Cassette 
Compartment Cover.
•  To protect the tape, if the cover is not fully opened, 
the cassette cannot be ejected.
2  Insert a Cassette.
3  Close the Cassette Holder by pressing the 
[PUSH] mark 
2
.
4  Close the Cassette Compartment Cover by 
pressing the mark 
3
.
2
1
 Inserting a Cassette
 Inserting a Card
 (For 
PV-GS12/PV-GS14/PV-GS15)
2  Slide the [OPEN] Lever 
3
 to open the Card 
Slot Cover 
4
.
3  While holding the Memory Card with its cut 
corner facing right 
5
 insert it into the Card 
Slot 
6
.
4  Close the Card Slot Cover 
4
 securely.
 Recording on a Tape
1  Set the [OFF/ON] Switch 
1
 to [ON].
•  The [POWER] Lamp 
2
 lights up.
2  Set the Mode Dial to Tape Recording Mode.
3  Press the Recording Start/Stop Button.
• Recording starts.
(PV-GS12/ 
PV-GS14/ 
PV-GS15)
(PV-GS9)
1
2
4  Press the Recording Start/Stop Button again 
to pause the recording.
3
1  Place your Thumb on the [OPEN▼] 
1
 Knob 
and pull the LCD Monitor 
2
 out in the 
direction of the arrow.
1
2
5
3
4
6