Panasonic PV-GS70 User Manual

Page of 114
12
Quick Guide
1
Charge the Battery. 
(
≥Connect the AC Cable to the AC Adaptor and plug it into the 
AC Wall Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the 
charging process.)
≥The [POWER] Lamp and [CHARGE] Lamp light up, and 
charging starts. When the [CHARGE] Lamp goes off, charging 
is completed.
≥Since the Battery will not be charged when the DC Cable is 
connected to the AC Adaptor, disconnect it.
2
Attach the Charged Battery to the Palmcorder. 
(
3
Insert the Cassette. 
(
≥Slide the [OPEN/EJECT] 
1
 Lever toward the front and pull 
down to open the Cassette Compartment.
≥Insert the Cassette.
≥Press the [PUSH] mark 
2
 to load the Cassette.
≥Close the outside compartment Cover.
4
Start recording. 
(
≥Turn the Palmcorder on. (
≥Rotate the Switch 
3
 to [ON]. (The [CAMERA] Lamp lights up.)
≥Press the 
Button. (Recording starts.)
≥Press the 
4
 Button again to pause the recording.
To View the Playback Picture
5
Switch to the VCR Mode, rewind the tape, and play 
the tape back. 
(
≥Set the 
Switch to VCR mode. (The [VCR] Lamp lights up.)
≥Press the 
Button. (Rewind the tape.)
≥Press the 
7
 Button. (Playback starts.)
≥Press the 
Button. (Playback stops.)
6
Turn the Palmcorder off. 
(
≥Set the 
Switch to [OFF].
OF
F ON MODE
1
2
3
4
5, 6 
1
CAMERA
VCR
CARD PB
3
4
7
8
6
SEARCH
BACK
LIGHT
FADE
2
CAMERA
VCR
CARD PB
5
9
OPEN /
EJECT
OF
F ON MODE
PUSH
PV-GS70P.book  12 ページ  2003年3月14日 金曜日 午前9時20分