Panasonic PV-GS2 User Manual
42
Editing Mode
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Recorder:
3 While pressing the [ REC] Button
3 While pressing the [ REC] Button
50
, press
the [PLAY] Button
68
on the Remote Control
(Optional). Or while pressing the [REC]
Button
Button
7
, press the [BACK LIGHT] Button
10
on the Camcorder.
• Recording starts.
To Stop Dubbing
Press the [ ] Button
Press the [ ] Button
65
or the [ ] Button
66
.
7
10
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Camcorder with other digital video
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal, and
using a 4-pin to 4-pin DV Interface Cable PV-DDC9
(optional)
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal, and
using a 4-pin to 4-pin DV Interface Cable PV-DDC9
(optional)
1
, high quality images and sounds can be
dubbed in the digital mode.
Player/Recorder:
1 Insert the Cassette and set to Tape Playback
1 Insert the Cassette and set to Tape Playback
Mode.
Player:
2 Press the [►] Button
2 Press the [►] Button
68
to start playback.
1
65
50
66
68
Copying on an S-VHS (or a VHS)
Cassette
Cassette
( Dubbing)
After connecting the Camcorder and the VCR as
illustrated, start the following procedures.
illustrated, start the following procedures.
1
AV Cable
[VIDEO IN]
[AUDIO IN]
1
• Be sure to press the [OSD] Button (p. 11) on the
Remote Control (Optional) prior to copying so that no
indications are visible. Otherwise, the displayed tape
counter and function indications are also copied.
indications are visible. Otherwise, the displayed tape
counter and function indications are also copied.
VCR:
4 Start recording.
5 Press the Pause or Stop Button to stop
4 Start recording.
5 Press the Pause or Stop Button to stop
recording.
Camcorder:
6 Press the [ ] Button to stop playback.
6 Press the [ ] Button to stop playback.
To Dub Audio While Listening to a Pre-recorded
Sound
When pausing the audio dubbing, set the [12bit
AUDIO] on the [PLAYBACK] Sub-Menu to [ST2]
and you can check the pre-recorded sound.
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
Sound
When pausing the audio dubbing, set the [12bit
AUDIO] on the [PLAYBACK] Sub-Menu to [ST2]
and you can check the pre-recorded sound.
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
• For other notes concerning this item, see page 60.
Camcorder:
1 Insert the recorded Cassette.
1 Insert the recorded Cassette.
VCR:
2 Insert an unrecorded Cassette with an
2 Insert an unrecorded Cassette with an
erasure prevention tab.
• If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
operating instructions of your VCR.
Camcorder:
3 Press the [►] Button to start playback.
3 Press the [►] Button to start playback.