Panasonic VDR-M70PP User Manual
34
Setups
This section explains preparations for recording - setting up the DVD Video Camera and battery pack.
Setting Up the DVD Video Camera
Holding DVD Video Camera
Using Grip Belt
Insert your right hand from the bottom of DVD Video
Camera up to the base of your thumb.
Put your hand in a position where you can easily operate
the REC button and the Zoom lever.
Adjust the length of grip belt so that the DVD Video
Camera is stable when you press the REC button with
your thumb.
Camera up to the base of your thumb.
Put your hand in a position where you can easily operate
the REC button and the Zoom lever.
Adjust the length of grip belt so that the DVD Video
Camera is stable when you press the REC button with
your thumb.
1) Detach the belt.
2) Ajust the length of grip belt.
3) Attach the belt.
2) Ajust the length of grip belt.
3) Attach the belt.
Note
:
Do not adjust the grip belt while holding the DVD Video Camera: Doing this could cause the DVD Video Camera to fall
and be damaged.
and be damaged.
To use as a Hand Strap
Using the Grip Belt as a hand strap makes it easier to carry the DVD Video Camera.
1
Detach the Grip Belt from the Video Camera.
1) Open the Lock cover.
1) Open the Lock cover.
2) Push the Lock button and pull the grip belt from
the DVD Video Camera.
Support the DVD Video Camera securely by the
hand to avoid falling.
Support the DVD Video Camera securely by the
hand to avoid falling.
2
Make it a hand strap.
1) Turn over the belt.
2) Pull the tip in the derection of the
1) Turn over the belt.
2) Pull the tip in the derection of the
arrow.
3) Attach the belt.
Lock cover
Lock cover
Lock button
Open the lock cover while pinching the protection
portion of both ends.
Return the lock cover to the closed position
after pulling out the grip belt.