Nikon COOLPIXS6500SIL User Manual

F

Tech

ni

cal
 Note

s 

and I

n

dex

Nikon Transfer 2 does not 
start when camera is 
connected to a computer.

• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2 

automatically. For more information about 
Nikon Transfer 2, refer to help information 
contained in ViewNX 2.

25
24
86, 91
–
88
93

The PictBridge startup 
screen is not displayed 
when the camera is 
connected to a printer.

With some PictBridge-compatible printers, the 
PictBridge startup screen may not be displayed and it 
may be impossible to print images when Auto is 
selected for the Charge by computer option in the 
setup menu. Set the Charge by computer option to 
Off and reconnect the camera to the printer.

105, 
E100

Images to be printed are not 
displayed.

• Memory card contains no images. Replace the 

memory card.

• Remove the memory card to print images from the 

internal memory.

• Images captured using 3D photography cannot 

be printed.

Cannot select paper size 
with camera.

Paper size cannot be selected from the camera in the 
following situations, even when printing from a 
PictBridge-compatible printer. Use the printer to 
select paper size.
• The printer does not support the paper sizes 

specified by the camera.

• The printer automatically selects the paper size.

86, 

E33,

E34
–

Problem

Cause/Solution

A