Sony 3-295-460-12(1) User Manual
101
C
u
st
o
miz
ing
th
e
th
e
set
tings
tings
Settings
For details on the operation 1 page 89
Shooting Settings — Shooting Settings 2
The default settings are marked with
.
Select the timing that the flash strobes.
On the [Rear]
• When the shutter speed is too fast, the [Rear] setting effect may not be available.
• When the red-eye reduction is selected, the red-eye reduction effect may not be available at slower shutter
• When the shutter speed is too fast, the [Rear] setting effect may not be available.
• When the red-eye reduction is selected, the red-eye reduction effect may not be available at slower shutter
speeds.
When the camera is rotated to shoot a portrait (vertical) image, the camera records its position
change and displays the image in the portrait position.
change and displays the image in the portrait position.
• Black is displayed to the left and right of vertical orientation images.
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. If an image is not recorded in the correct orientation, you can rotate the image, following the
procedure on page 87.
procedure on page 87.
Flash Sync.
Front
Normally, use this setting. Since the flash strobes right after
the shutter is released, this allows you to get your shot closer
to the time you release the shutter.
the shutter is released, this allows you to get your shot closer
to the time you release the shutter.
Rear (REAR)
Used for a moving subject, etc. Since the flash strobes right
before the shutter is closed, this allows you to reflect the trail
of a light or movement afterimage on a subject.
before the shutter is closed, this allows you to reflect the trail
of a light or movement afterimage on a subject.
Auto Orientation
On
Records the image with the correct orientation.
Off
Does not use Auto Orientation.