Sony DSC-F828 User Manual

Page of 160
120
Shooting still images / movies
The battery remaining 
indicator is incorrect, or 
sufficient battery 
remaining indicator is 
displayed but the power 
runs out soon.
• You have used the camera for a long time in an 
extremely hot or an extremely cold location.
• A deviation has occurred in the remaining 
battery time.
• The battery pack is discharged. 
• The battery pack is dead (page 147)
p Charge the battery pack after using it completely. The battery 
remaining indicator displays the correct time (page 15).
p Install a charged battery pack (page 14).
p Replace the battery pack with a new one.
The battery pack runs 
down too quickly.
• You have used the camera in an extremely cold 
location.
• The DC plug is dirty so the battery pack is not 
charged enough.
• The battery pack is dead (page 147).
p Clean the DC plug with a cotton bud, etc., and charge the battery 
p Replace the battery pack with a new one.
You cannot turn on the 
camera.
• The battery pack is not installed correctly.
• The AC Adaptor is disconnected.
• The AC Adaptor has malfunctioned.
• The battery pack is discharged.
• The battery pack is dead (page 147).
p Install the battery pack correctly (page 14).
p Properly connect the AC Adaptor (page 17).
p Consult your Sony dealer or local authorized Sony service 
facility.
p Install a charged battery pack (page 14).
p Replace the battery pack with a new one.
The power turns off 
suddenly. 
• If you do not operate the camera for about three 
minutes when using a battery pack, the camera 
turns off automatically to prevent wearing down 
the battery (page 18).
• The battery pack is discharged. 
p Turn on the camera again (page 18) or use the AC Adaptor 
p Replace it with a charged battery pack (page 14).
Symptom
Cause
Solution
The LCD screen is not 
turned on even when the 
power is turned on.
• The FINDER/LCD switch is set to FINDER.
p Set it to LCD (page 29).
The subject is not visible 
on the finder.
• The diopter scale is not properly adjusted.
p Adjust the finder adjustment lever (page 29).
The subject is not visible 
on the screen.
• The mode dial is not set to 
, P, S, A, M, SCN 
or .
p Set it to 
, P, S, A, M, SCN or 
 (pages 27 and 100).
Symptom
Cause
Solution