JVC LPT0319-001A User Manual
51
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
recorded tape with a new soundtrack.
ATTENTION:
Audio dubbing is not possible with a cassette recorded in EP
mode.
mode.
Audio Dubbing
Original sound
AUDIO OUT
Audio mixer
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO L + R
connectors on the recorder's front panel.
connectors on the recorder's front panel.
● When connecting monaural equipment, use only the
recorder's AUDIO L connector.
SET INPUT MODE
2
Press AUX and/or PR so that "F-1" or "S-1" appears in
place of a channel number.
place of a channel number.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
recorder, and press PAUSE when you find the point
where you want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A. DUB.
● It is possible to take the original sound recorded on
the tape in your recorder and mix it with other
sounds from a microphone, CD player etc. To
perform this audio dubbing with audio mixing,
connect as in the diagram on the left.
sounds from a microphone, CD player etc. To
perform this audio dubbing with audio mixing,
connect as in the diagram on the left.
● Your recorder enters the Audio Dubbing Pause mode.
(" " blinks, " " and " " light up on the front display
panel.)
panel.)
● To perform audio dubbing with audio mixing, press
AUDIO to select "
+ (L+R)" at this point.
* Audio dubbing with audio mixing is not possible if
you're using a monaural audio component, or if
you don't have an audio mixer.
you don't have an audio mixer.
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
● " " blinks and " " is displayed on the front display
panel.
● To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
engage the audio component's Stop mode.
Audio-dubbed tape
CD Player, etc.
Mixer
output
output
Pre-recorded tape
Normal audio track
Video/Hi-Fi audio
track
track
NOTES:
● When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO on the remote control to select " + (L+R) +
NORM" (
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO on the remote control to select " + (L+R) +
NORM" (
Z
pg. 35).
● Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
counter reading before dubbing.
● Audio dubbing is also possible using the rear panel AV1 (L-1) IN/
OUT or AV2 (L-2) IN/DECODER connector. When using these
connectors, make sure to select the correct input mode in step 2.
connectors, make sure to select the correct input mode in step 2.
● Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
● When playing back an audio-dubbed tape, press AUDIO on
the remote control to select the soundtrack you wish to hear
(
(
Z
pg. 35).
CD Player, etc.
PLAY
PAUSE
STOP
A. DUB
PR