Universal Remote Control TRC-780 User Manual

steps down to a minimum time of 5 seconds.         
Pressing the More side will increase the time in 
steps up to a maximum of 60 seconds. Once the 
setting is adjusted, press the Save button. Pressing 
the Cancel button will revert the remote’s Automatic 
Turn Off setting to the last saved setting. 
Note: The longer the OLED screen stays on, the faster 

the batteries will deplete.

The Button Light settings page provides two
configurable options for how the TRC-780’s
hard buttons should behave.

1. Automatic ON: Adjusting this setting will

control when the hard button backlight
turns on.

a. Automatic Light Yes: Every time a 

button is pressed the button back light will automati-
cally turn On.

b. Automatic Light No: The only way to turn on the hard

button back-light is to press the dedicated Lights button
located on the right side of the remote control.

Once all changes have been made, press the Save button. 
Pressing the Cancel button will revert to the remotes last saved 
setting. 
Note: The more often the back light turns On, the faster the 
batteries will deplete.

2. Automatic Turn Off: You can adjust the amount of time the back-

light will remain after a button is pressed.
Press the left and right screen buttons next
to the slider bar to change the duration.
Pressing the Less side will decrease the time 
in steps down to a minimum of 5seconds. 
Pressing the More side will increase the time 
in steps up to a maximum of 60 seconds. 
Once the setting has been adjusted, simply 
press the Save button. Pressing the Cancel button will revert to
the remote’s last saved Automatic Turn off setting. 
Note: The longer the backlight stays on, the faster the batteries
will deplete.