Pelco C1977M-D User Manual
[ 92 ]
Pelco Manual C1977M-D (6/02)
REVISION HISTORY
Manual #
Date
Comments
C1977M
5/00
Original version.
C1977M-A
5/01
Revised the General, Video, Audio, Alarm, and Interface Settings Configuration pages and
their documentation. Revised the System 9760, Genex, and Spectra Control pages and
their documentation. Added the Esprit and DX3000 Control pages and their documentation.
Added material about setting motion detection and about recording/playback on the PC’s
hard drive. Added Appendices A and B.
their documentation. Revised the System 9760, Genex, and Spectra Control pages and
their documentation. Added the Esprit and DX3000 Control pages and their documentation.
Added material about setting motion detection and about recording/playback on the PC’s
hard drive. Added Appendices A and B.
C1977M-B
6/01
Added documentation on the warning reset button.
C1977M-C
7/01
Changed “System 9760” control pages name to “Matrix Control.” Changed “DX3009”
control pages name to “DX3016,” added camera buttons 10-16, added 16-grid button, and
removed the “C” button.
control pages name to “DX3016,” added camera buttons 10-16, added 16-grid button, and
removed the “C” button.
C1977M-D
6/02
Changed “active high” and “active low” to “Normally Open” and “Normally Closed” on the
Alarm Settings configuration screen.
Alarm Settings configuration screen.
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date
of shipment. Exceptions to this warranty are as noted below:
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date
of shipment. Exceptions to this warranty are as noted below:
•
Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and MC3500/MC3600 Series); two years on all other cameras.
•
Three years on Genex
®
Series (multiplexers, server, and keyboard).
•
Two years on all standard motorized or fixed focal length lenses.
•
Two years on Legacy
®
, Camclosure
™
Camera Systems, CM6700/CM6800/CM8500/CM9500/CM9740/CM9760 Matrix, DF5 and DF8 Series
Fixed Dome products.
•
Two years on Spectra
®
, Esprit
™
, and PS20 Scanners, including when used in continuous motion applications.
•
Two years on Esprit and WW5700 series window wiper (excluding wiper blades).
•
Eighteen months on DX Series digital video recorders.
•
One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.
•
Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan
modes).
modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be
sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not
covered under this warranty.
sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not
covered under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from
state to state.
state to state.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number
(RA), and provide the following information:
(RA), and provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written
explanation with the product when returned.
explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an
authorization number (CA number if returned for credit, and RA number if returned for repair).
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an
authorization number (CA number if returned for credit, and RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the
appropriate address below.
appropriate address below.
WARRANTY AND RETURN INFORMATION
If you are located within the continental U.S.,
Alaska, Hawaii or Puerto Rico:
Alaska, Hawaii or Puerto Rico:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:
Intermediate Consignee
Ultimate Consignee
American Overseas Air Freight
Pelco
320 Beach Road
3500 Pelco Way
Burlingame, CA 94010
Clovis, CA 93612-5699
USA
USA