Panasonic TC 22LR30 User Manual
25
TV Operation
Top view
Select desired channel:
Press CH ▲▼ or NUMBER keys.
Adjust desired volume level:
Press VOL + or VOL –.
Selecting Input Mode
Using the CH/VOL Button
TUNER:
Signal of source connected to VHF/UHF terminal is displayed.
VIDEO 1:
Signal of source connected to AV Input terminal 1 is displayed.
VIDEO 2:
Signal of source connected to AV Input terminal 2 is displayed.
COMPONENT:
Signal of source connected to COMPONENT Input terminal is
displayed.
HDMI:
Signal of source connected to HDMI Input terminal is displayed.
When selecting CABLE channels 100 to 125 with the NUMBER
keys.
1
Press R-TUNE to display the last channel you were
watching.
Example 1:
To select channel 125, first press the 1 key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, then 2.
Example 3:
To select channel 2, first press the 0 key, then 2.
Rapid Tune
VIDEO1*
COMPONENT*
VIDEO2*
HDMI*
TUNER*
Using the NUMBER keys
This unit can be set for auto power off.
1
Press SLEEP repeatedly to select the desired time.
• To cancel, press SLEEP repeatedly until “0” appears.
2
The indication goes off a few seconds after the
adjustment is finished.
• Pressing DISPLAY with sleep timer set displays remaining time.
• From 3 minutes prior to power off, 3, then 2, then 1 flashes
• From 3 minutes prior to power off, 3, then 2, then 1 flashes
on-screen.
Sleep Timer
30
60
0
90
9 0
INPUT
NUMBER keys
▲▼◄►
AUDIO
ASPECT
DISPLAY
ENTER
MENU
R-TUNE
VOL +/-
CH ▲▼
MUTE
SLEEP
* If SKIP is set as the INPUT LABEL setting, the mode will not be changed.
(p. 28)
1
Press
INPUT.
• The display will change as follows.
TV Operation
INPUT
VOL +/-
Method 1
1
Press
CH
▲▼.
• The display will change as follows.
Notes:
• The diagram at right is an example.
• TV CH 2 and CABLE CH 1 represent the
• TV CH 2 and CABLE CH 1 represent the
lowest channels in memory, while TV CH
69 and CABLE CH 125 represent the
highest channels in memory.
69 and CABLE CH 125 represent the
highest channels in memory.
(TV)
CH69
(CABLE)
CH125
(TV)
CH2
(CABLE)
CH1
VIDEO1*
COMPONENT*
VIDEO2*
HDMI*
* If SKIP is set as the INPUT LABEL setting,
the mode will not be changed. (p. 28)
Method 2
CHANNEL ▲▼