Pelco C2943M-B User Manual
12
C2943M-B (1/09)
OSD FUNCTION
INPUT SOURCE DISPLAY
Figure 6. Input Source Display Screen
The input source is displayed in the upper-right corner, where it can be changed. It can be changed using the Source button on the monitor or
using the buttons on the remote control (when the OSD Mode Label is set to ON). The default setting is OFF.
using the buttons on the remote control (when the OSD Mode Label is set to ON). The default setting is OFF.
To use the menus:
1. Press the MENU button to access the Main menu.
2. Use the up and down arrow buttons (# and $) to highlight a selection.
3. Press ENTER to select an item.
4. Use the up and down arrow buttons (# and $) to highlight a selection.
5. Use the "
/VOL- and !/VOL+ arrow buttons to adjust the setting of a selected item.
MAIN MENU
Figure 7. Main Menu
VIDEO 1
VIDEO1
VIDEO2
CAMERA
MEDIA
PICTURE
Brightness
VIDEO-1
NTSC
50
Contrast
50
Sharpness
9
Color
50
Tint
50
Color Temp
Red
50
Green
50
Blue
50
User
SCREEN
SET UP
PVM SETUP
CYCLE SETUP
CAMERA
SET UP
PVM SETUP
CYCLE SETUP
CAMERA
Maintenance