Runco SP-50 User Manual
24
Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual
PRE
L
IMINAR
Y
Audio Output: The CinemaWall has a stereo audio output for connection to an external
A/V receiver or powered speakers. The audio signal corresponding to the selected video
input is output to both the speakers and this audio output.
A/V receiver or powered speakers. The audio signal corresponding to the selected video
input is output to both the speakers and this audio output.
Use a stereo miniplug to connect the CinemaWall stereo audio output to your external
audio equipment; see Figure 3-11.
audio equipment; see Figure 3-11.
Figure 3-11. Audio Output Connection
Speakers: The CinemaWall has an internal, 8W per channel stereo amplifier that can
drive a pair of stereo speakers. Connect the
drive a pair of stereo speakers. Connect the
(positive) and
(negative) speaker wires
to the EXT SPEAKER terminals on both the LEFT and RIGHT channels; see Figure 3-12.
Maintain the correct polarity. For more information, refer to the owner’s manual for
your speakers.
Maintain the correct polarity. For more information, refer to the owner’s manual for
your speakers.
Figure 3-12. Connecting Speakers
The audio output level is fixed. (The volume and mute controls affect
only the speaker outputs.)
only the speaker outputs.)
Note
AUDIO AUDIO
INPUT1
AUDIO
OUTPUT
INPUT2
m
m
2
1
Twist exposed
wire strands
together.
wire strands
together.
Push tab to the open
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.