Aastra Telecom 41-001507-00 User Manual
Installation and Setup
41-001507-00 REV00 – 04.2014
8
Connecting a Handset or Headset
Handset
Turn the phone over and locate the handset jack marked
j. Insert one end of handset cord into the jack until it clicks
into place. Then route the handset cord through the groove as shown in the illustration below. Attach the handset to the
other end of the handset cord.
other end of the handset cord.
Headset (Optional)
Turn the phone over and locate the headset jack marked
f
. If you have a headset with an RJ9/RJ22 4-pin connector,
insert the headset cord into the jack until it clicks into place. Then route the headset cord through the groove as shown in
the above illustration.
the above illustration.
If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector, remove the plastic headset jack adapter and then
insert the cord into the jack until it clicks into place.
insert the cord into the jack until it clicks into place.
Alert!
The headset port is for headset use only. Plugging any other devices into this port may cause damage to the phone and
will void your warranty.
will void your warranty.
To Handset
Pull to remove headset jack adaptor