ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual
Chapter 7 Wireless
VMG5313-B10A/-B30A Series User’s Guide
109
Figure 28
Network Setting > Wireless > General
The following table describes the general wireless LAN labels in this screen.
Table 16
Network Setting > Wireless > General
LABEL
DESCRIPTION
Wireless Network Setup
Wireless
You can Enable or Disable the wireless LAN in this field.
Band
This shows the wireless band which this radio profile is using. 2.4GHz is the frequency used
by IEEE 802.11b/g/n wireless clients.
by IEEE 802.11b/g/n wireless clients.
Channel
Use Auto to have the VMG automatically determine a channel to use.
more.../less
Click more... to show more information. Click less to hide them.
Bandwidth
Select whether the VMG uses a wireless channel width of 20MHz or 40MHz.
A standard 20MHz channel offers transfer speeds of up to 150Mbps whereas a 40MHz
channel uses two standard channels and offers speeds of up to 300 Mbps.
channel uses two standard channels and offers speeds of up to 300 Mbps.
40MHz (channel bonding or dual channel) bonds two adjacent radio channels to increase
throughput. The wireless clients must also support 40 MHz. It is often better to use the 20
MHz setting in a location where the environment hinders the wireless signal.
throughput. The wireless clients must also support 40 MHz. It is often better to use the 20
MHz setting in a location where the environment hinders the wireless signal.
Select 20MHz if you want to lessen radio interference with other wireless devices in your
neighborhood or the wireless clients do not support channel bonding.
neighborhood or the wireless clients do not support channel bonding.