ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual
Chapter 11 Network Address Translation (NAT)
VMG5313-B10A/-B30A Series User’s Guide
187
11.4 The Port Triggering Screen
Some services use a dedicated range of ports on the client side and a dedicated range of ports on
the server side. With regular port forwarding you set a forwarding port in NAT to forward a service
(coming in from the server on the WAN) to the IP address of a computer on the client side (LAN).
The problem is that port forwarding only forwards a service to a single LAN IP address. In order to
use the same service on a different LAN computer, you have to manually replace the LAN
computer's IP address in the forwarding port with another LAN computer's IP address.
the server side. With regular port forwarding you set a forwarding port in NAT to forward a service
(coming in from the server on the WAN) to the IP address of a computer on the client side (LAN).
The problem is that port forwarding only forwards a service to a single LAN IP address. In order to
use the same service on a different LAN computer, you have to manually replace the LAN
computer's IP address in the forwarding port with another LAN computer's IP address.
Trigger port forwarding solves this problem by allowing computers on the LAN to dynamically take
turns using the service. The VMG records the IP address of a LAN computer that sends traffic to the
WAN to request a service with a specific port number and protocol (a "trigger" port). When the
VMG's WAN port receives a response with a specific port number and protocol ("open" port), the
VMG forwards the traffic to the LAN IP address of the computer that sent the request. After that
computer’s connection for that service closes, another computer on the LAN can use the service in
the same manner. This way you do not need to configure a new IP address each time you want a
different LAN computer to use the application.
turns using the service. The VMG records the IP address of a LAN computer that sends traffic to the
WAN to request a service with a specific port number and protocol (a "trigger" port). When the
VMG's WAN port receives a response with a specific port number and protocol ("open" port), the
VMG forwards the traffic to the LAN IP address of the computer that sent the request. After that
computer’s connection for that service closes, another computer on the LAN can use the service in
the same manner. This way you do not need to configure a new IP address each time you want a
different LAN computer to use the application.
For example:
Figure 78
Trigger Port Forwarding Process: Example
1
Jane requests a file from the Real Audio server (port 7070).
2
Port 7070 is a “trigger” port and causes the VMG to record Jane’s computer IP address. The VMG
associates Jane's computer IP address with the "open" port range of 6970-7170.
associates Jane's computer IP address with the "open" port range of 6970-7170.
3
The Real Audio server responds using a port number ranging between 6970-7170.
4
The VMG forwards the traffic to Jane’s computer IP address.
5
Only Jane can connect to the Real Audio server until the connection is closed or times out. The VMG
times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP (Transfer
Control Protocol/Internet Protocol).
times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP (Transfer
Control Protocol/Internet Protocol).
Click Network Setting > NAT > Port Triggering to open the following screen. Use this screen to
view your VMG’s trigger port settings.
view your VMG’s trigger port settings.