ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual

 Chapter 14 Interface Group

VMG5313-B10A/-B30A Series User’s Guide

Interface Group Configuration 

The following table describes the fields in this screen. 

Interface Group Configuration

Group Name

Enter a name to identify this group. You can enter up to 30 characters. You can use letters, 
numbers, hyphens (-) and underscores (_). Spaces are not allowed.

WAN Interface 
used in the 
grouping

Select the WAN interface this group uses. The group can have up to one PTM interface, up to 
one ATM interface and up to one ETH interface.

Select None to not add a WAN interface to this group.

Grouped LAN 
Interfaces

Available LAN 
Interfaces

Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the Available 
LAN Interfaces list and use the left arrow to move them to the Grouped LAN Interfaces 
list to add the interfaces to this group.

To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces, use the 
right-facing arrow.

Automatically 
Add Clients 
With the 
following DHCP 
Vendor IDs

Click Add to identify LAN hosts to add to the interface group by criteria such as the type of 
the hardware or firmware. See 

 for more information.

#

This shows the index number of the rule.

Filter Criteria

This shows the filtering criteria. The LAN interface on which the matched traffic is received 
will belong to this group automatically.

WildCard 
Support

This shows if wildcard on DHCP option 60 is enabled.

Remove

Click the Remove icon to delete this rule from the VMG.

Apply

Click Apply to save your changes back to the VMG.

Cancel

Click Cancel to exit this screen without saving.