ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual
VMG5313-B10A/-B30A Series User’s Guide
333
C
H A P T E R
3 7
Firmware Upgrade
37.1 Overview
This chapter explains how to upload new firmware to your VMG. You can download new firmware
releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to upgrade your device’s
performance.
releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to upgrade your device’s
performance.
Only use firmware for your device’s specific model. Refer to the label on
the bottom of your VMG.
the bottom of your VMG.
37.2 The Firmware Screen
Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
Do NOT turn off the VMG while firmware upload is in progress!
Figure 173
Maintenance > Firmware Upgrade
The following table describes the labels in this screen. After you see the firmware updating screen,
wait two minutes before logging into the VMG again.
wait two minutes before logging into the VMG again.