Telex US2002 User Manual
Intercom User Station US2002 - 20
Figure 8. US2002 Binaural Speaker Station Configuration with 2 Power Supplies.
This is a good configuration for large intercom systems when you want to operate the US2002 as a
master speaker station, with a separate speaker for each intercom channel. In this configuration, the
SPS2001 Combine/Isolate switches are set to the Combine position. With this setting all intercom
stations connected to the one SPS2001 are combined on intercom channel 1 and all intercom stations
connected to the other SPS2001 are combined on channel 2. The amplified speaker in each SPS2001
monitors a single intercom channel, and the US2002 dip switches are set to binaural operation (see
page 10). The PA-KP local power supply is optional. When a PA-KP is connected, the US2002 auto-
matically disconnects from system power. Since the US2002 is not drawing power from the intercom
system, more system power is available for additional belt packs, etc.
This is a good configuration for large intercom systems when you want to operate the US2002 as a
master speaker station, with a separate speaker for each intercom channel. In this configuration, the
SPS2001 Combine/Isolate switches are set to the Combine position. With this setting all intercom
stations connected to the one SPS2001 are combined on intercom channel 1 and all intercom stations
connected to the other SPS2001 are combined on channel 2. The amplified speaker in each SPS2001
monitors a single intercom channel, and the US2002 dip switches are set to binaural operation (see
page 10). The PA-KP local power supply is optional. When a PA-KP is connected, the US2002 auto-
matically disconnects from system power. Since the US2002 is not drawing power from the intercom
system, more system power is available for additional belt packs, etc.
Note:
For further
information about the
cable numbers, see
page 14
cable numbers, see
page 14
.
Note: A BOP-1000 may
be used to rack mount
2 TW-7W splitters.
be used to rack mount
2 TW-7W splitters.