Panasonic AJ-HD1800P User Manual

Setup menus

(continued)

<EDIT>

When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.

The underlining (__) denotes the factory setting mode.

No./Item

Description of setting

300

IN/OUT DEL

For selecting the operation to be performed
when an edit point has been set incorrectly
(when the OUT point comes before the IN
point).

0000

MANU

Editing is not performed unless the illegal edit
point is cleared or set properly.

0001

AUTO

The edit point which had already been input is
cleared automatically.

301

NEGA FLASH

For selecting whether to show a negative
display (time code display area) when the IN
point is greater than the OUT point.

0000

OFF

A negative display is not shown.

0001

A negative display is shown.

302*

CONFI EDIT

For selecting whether to perform simultaneous
playback during editing.

0000

OFF

Simultaneous playback is not performed.

0001

Simultaneous playback is performed.

<Note>
Regardless of the settings in Setup Menu No. 140
(OUTPUT), simultaneous playback is always
performed during editing.

303

AUD EDIT
IN

For selecting how to connect the digital audio
edit IN points.

0000

CUT

Cut processing

0001

FADE

V-fade processing

304

AUD EDIT OUT

For selecting how to connect the digital audio
edit OUT points.

0000

CUT

Cut processing

0001

FADE

V-fade processing

305

AUTO ENTRY

For selecting whether to register the IN points
using the PREROLL button in cases where the
IN points have not been registered.

0000

DIS

The IN points are not registered.

0001

ENA

The IN points are registered

306

CF ADJ SEL

For selecting the deck whose the color framing
is to be adjusted during deck-to-deck editing.
0000 PLAYER

The player’s IN and OUT points are adjusted
(using the recorder as the reference).

0001 RECORD

The recorder’s IN and OUT points are adjusted
(using the player as the reference).

307

AFTER
CUE-UP

For selecting the VTR’s mode upon completion
of the cue-up operation.

0000

STOP

The VTR is set to the STOP mode.

0001

STILL

The VTR is set to the still picture (SHTL STILL)
mode.

0002

STILL2

The VTR is set to the still picture (SLOW STILL)
mode.

No./Item

Description of setting

308

VAR FWD MAX

For setting the maximum speed of SLOW FWD.

0000

+4.9

i4.9 times normal tape speed

0001

i2 times normal tape speed (i1.85 times
normal tape speed for formats other than
DVCPRO HD-LP)

0002

i1 times normal tape speed

<Notes>
z At any setting other than 0 (i4.9), phase

adjustments cannot be conducted from the
editing controller.

z Depending on the format used, the actual tape

running speed differs slightly from what is
indicated by the superimposed display.

309

VAR REV MAX

For setting the maximum speed of SLOW REV.

0000

-4.9

j4.9 times normal tape speed

0001

-2

j2 times normal tape speed (j1.85 times
normal tape speed for formats other than
DVCPRO HD-LP)

0002

-1

j1 times normal tape speed

<Note>
Depending on the format used, the actual tape
running speed differs slightly from what is indicated
by the superimposed display.

310

JOG FWD
MAX

For setting the maximum speed of JOG FWD.

0000

+4.9

i4.9 times normal tape speed

0001

i2 times normal tape speed (i1.85 times
normal tape speed for formats other than
DVCPRO HD-LP)

0002

i1 times normal tape speed

<Note>
At any setting other than 0 (

i4.9), phase

adjustments cannot be conducted from the editing
controller which performs these adjustments by the
JOG command.

311

JOG REV MAX

For setting the maximum speed of JOG REV.

0000

-4.9

j4.9 times normal tape speed

0001

-2

j2 times normal tape speed (j1.85 times
normal tape speed for formats other than
DVCPRO HD-LP)

0002

-1

j1 times normal tape speed

312*

POSTROLL
TM

For setting the postroll time.
Any time from 0 to 5 seconds can be set in 1-
second increments.

0000

0001

0002

0003

0004

0005