Maxtor 16Channel Stand Alone DVR User Manual
8
CHAP. 2 Function of Each Button
2-2. REAR
Name
Function
1
RS 485
Connection with PTZ Camera or other external device using RS 485
interface
interface
RELAY Output
Relay out terminal
SENSOR Input
Sensor input terminal
2
VGA
Connection to VGA Monitor (CRT type or TFT LCD monitor)
Just in case you purchased DVR with VGA option board fixed on the main
board of DVR, you can connect VGA Monitor to DVR unit.
board of DVR, you can connect VGA Monitor to DVR unit.
3
ETHERNET
Connection to ETHERNET device
4
RS-232C
Connection to external device as PC using RS-232C to control the DVR
5
CAMERA Input
Connection with camera
6
LOOP Output
Camera loop out
7
MONITOR
Output
Output
Connection with Composite Monitor
8
SPOT
Connection with additional composite monitor
9
DC Power
DC 12V 6.67A Adaptor
10
POWER
SWITCH
SWITCH
Power ON/OFF switch for adapters
To avoid accidental deletion of HDD data, please make sure to press
MENU button and enter into setup menu before powering off the unit.
MENU button and enter into setup menu before powering off the unit.
This takes the unit out of record mode for safe shutdown.
11
Audio Input
Microphone Input (4ch)
Audio Output
Speaker Output (1ch)