Panasonic KX-FC225NZ User Manual
2. Preparation
17
2.2 Battery charge
Place the cordless handset on the cradle of the base unit
for about 7 hours before initial use.
When charging, the battery strength icon is shown as
follows.
for about 7 hours before initial use.
When charging, the battery strength icon is shown as
follows.
When the batteries are fully charged,
5 remains on
the display.
L The charge indicator (1) lights up when the cordless
handset is placed on the base unit.
Note:
L To ensure the battery charges properly, clean the
charge contacts of the cordless handset (
2) and the
charger (
3) with a soft, dry cloth once a month.
Clean more often if the unit is subject to grease, dust,
or high humidity.
or high humidity.
Battery strength
Panasonic Ni-MH battery performance (included
batteries)
batteries)
Note:
L It is normal for batteries not to reach full capacity at
the initial charge. Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends on a
combination of how often the cordless handset is in
use and how often it is not in use (standby).
use and how often it is not in use (standby).
L Battery operating time may be shortened over time
depending on usage conditions and ambient
temperature.
temperature.
L Even after the cordless handset is fully charged, the
cordless handset can be left on the base unit without
any ill effect on the batteries.
any ill effect on the batteries.
L The battery strength may not be displayed correctly
after you replace the batteries. In this case, place the
cordless handset on the base unit and charge for at
least 7 hours.
cordless handset on the base unit and charge for at
least 7 hours.
2.3 Turning the cordless handset
power ON/OFF
power ON/OFF
Power ON
Press
{ih} for about 1 second.
Power OFF
Press
{ih} for about 2 seconds.
Battery icon
Battery strength
5
High
6
Medium
7
Low
When flashing: Needs to be
charged.
When flashing: Needs to be
charged.
Operation
Operating time
In continuous use
17 hours max.
In continuous standby
mode
mode
180 hours max.
1
3
2