Panasonic KX-FC225NZ User Manual

51

{#}{7}{2}

The recall/flash time depends on your telephone exchange or 
host PBX.
{1} “900msec.”

{2} “700msec.”

{3} “600msec.”

{4} “400msec.”

{5} “300msec.”

{6} “250msec.”

{7} “200msec.”

{8} “160msec.”

{9} “110msec.”

{*} “100msec.” (default)

{0} “90msec.”

{#} “80msec.”
Note:

L If the unit is connected via a PBX, this setting may need to be 

changed in order for PBX functions (transferring a call, etc.) to 
work correctly. Consult your PBX supplier for the correct 
setting.

{#}{7}{6}

If you often have trouble when sending faxes, this feature allows 
you to hear connecting tones: fax tone, ring back tone and busy 
tone. You can use those tones to confirm the status of the other 
party’s machine.
{0} “OFF”: Deactivates this feature.

{1} “ON” (default): You will hear connecting tones.
Note:

L If the ring back tone continues, the other party’s machine may 

not be a fax machine or may have run out of paper. Check with 
the other party.

L The connecting tone volume cannot be adjusted.

{#}{7}{7}

{1} “TAM/FAX” (default): Telephone Answering Machine/Fax 
mode (page 36)
{2} “FAX ONLY”: Fax only mode (page 36)

{#}{8}{0}

{0} “NO” (default)

{1} “YES”
To reset the advanced features:

{MENU} i {#}{8}{0}

2. Press 

{1} to select “YES”. i {SET} i {SET}

L The ECM selection (feature #68 on page 50) will not be reset.

*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and 

vice versa.

*2 This setting can be changed individually for the base unit and the cordless handset.

–

To change the cordless handset LCD display contrast, see page 52.

*3 For KX-FC225NZ, the default setting is “

600msec.”.