Panasonic KX-FC225NZ User Manual
12. Help
60
12 Help
12.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the sending
and journal reports (page 31).
and journal reports (page 31).
Message
Code
Cause & Solution
COMMUNICATION ERROR
40-42
46-72
46-72
FF
L A transmission or reception error occurred. Try
again or check with the other party.
43
44
44
L A line problem occurred. Connect the telephone line
cord to a different jack and try again.
L An overseas transmission error occurred. Try using
the overseas mode (feature #23 on page 47).
DOCUMENT JAMMED
-----
L Remove the jammed document (page 72).
ERROR-NOT YOUR UNIT
53
54
59
70
54
59
70
L A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
Check with the other party.
JUNK FAX PROH. REJECT
-----
L The junk fax prohibitor feature of this unit rejected
fax reception.
MEMORY FULL
-----
L The memory is full of received documents due to a
lack of recording paper, a lack of ink film or a
recording paper jam. Install paper (page 15), install
ink film (page 13) or remove the jammed paper
(page 71).
recording paper jam. Install paper (page 15), install
ink film (page 13) or remove the jammed paper
(page 71).
NO DOCUMENT
-----
L The document was not fed into the unit properly. Re-
insert the document and try again.
OTHER FAX NOT RESPONDING
-----
L The other party’s fax machine is busy or has run out
of recording paper. Try again.
L The other party’s fax machine rang too many times.
Send the fax manually (page 31).
L The other party’s machine is not a fax machine.
Check with the other party.
L The number you dialled is not in service.
PRESSED THE STOP KEY
-----
L {STOP} was pressed, and fax transmission or
reception was cancelled.
OK
-----
L Fax transmission or reception was successful.