Sony 85P User Manual
Setting the Time Data
Chapter 3 Convenient Functions for Editing Operation
32
Chapter 3
Convenient Functions for Editing Operation
C
Drop frame indication for time code
generator (on DSR-85 only)
D
DSR-85/85P operation modes
a) “+2.0” in the left box is an example of playback speed
indication.
To display the desired time data in the
time counter display
time counter display
Press the COUNTER SELECT button on the front
panel of the unit.
Each press of this button cycles through three options:
CNT value, time code, and user bit data. The time
data type indicator for each option lights as it is
selected.
panel of the unit.
Each press of this button cycles through three options:
CNT value, time code, and user bit data. The time
data type indicator for each option lights as it is
selected.
Note
The COUNTER SELECT button will not operate
when the REMOTE/LOCAL switch has been set to
REMOTE. Use the external equipment connected to
the REMOTE connector on the rear panel to select the
time data.
when the REMOTE/LOCAL switch has been set to
REMOTE. Use the external equipment connected to
the REMOTE connector on the rear panel to select the
time data.
To reset the CNT value
Press the RESET (NO) button on the menu control
panel. This resets the CNT value to 0:00:00:00.
panel. This resets the CNT value to 0:00:00:00.
Note
If during playback the recording on the tape includes
discontinuities, the counter may operate incorrectly at
the corresponding points.
discontinuities, the counter may operate incorrectly at
the corresponding points.
Time data type
indicator
indicator
Time data shown in the time counter
display
display
CNT (count value of the time counter)
COUNTER
TC
Time code (if recording, the time code is
generated by the internal time code
generator; if playing back, the time code
is read from the tape)
generated by the internal time code
generator; if playing back, the time code
is read from the tape)
U-BIT
User bit data (if recording, the user bit
data is according to the most recent
settings; if playing back, the user bit
data is read from the tape)
data is according to the most recent
settings; if playing back, the user bit
data is read from the tape)
)
0
6
r
p
Time data type indicators
COUNTER SELECT button
Time counter display
Indication
Operation mode
THREADING
Tape is being threaded (this indicator
is displayed from the time a cassette is
inserted until the tape has been
threaded)
is displayed from the time a cassette is
inserted until the tape has been
threaded)
UNTHREADING
Tape is being unthreaded (this
indicator is displayed from the time the
EJECT button is pressed until the
cassette is actually ejected)
indicator is displayed from the time the
EJECT button is pressed until the
cassette is actually ejected)
CASSETTE OUT
No cassette has been loaded
STANDBY OFF
Standby off mode
T. RELEASE
Tension release mode
STOP
Stop mode
F. FWD
Fast forward mode
REW
Rewind mode
PREROLL
Preroll mode
PLAY
Playback mode (servo unlocked)
PLAY LOCK
Playback mode (servo locked)
PLAY PAUSE
Playback pause mode
REC
Recording mode (servo unlocked)
REC LOCK
Recording mode (servo locked)
REC PAUSE
Recording pause mode
EDIT
Edit mode (servo unlocked)
EDIT LOCK
Edit mode (servo locked)
JOG STILL
Still picture playback in jog mode
JOG FWD
Jog forward
JOG REV
Jog reverse
SHUTTLE +2.0
Shuttle mode (playback speed)
a)
PAUSE
Shuttle playback pause mode
×
4 PLAY
Quadruple speed playback mode
(servo unlocked)
(servo unlocked)
×
4 PLAY LOCK
Quadruple speed playback mode
(servo locked)
(servo locked)
×
4 REC
Quadruple speed recording mode
(servo unlocked)
(servo unlocked)
×
4 REC LOCK
Quadruple speed recording mode
(servo locked)
(servo locked)
×
4 EDIT
Quadruple speed edit mode (servo
unlocked)
unlocked)
×
4 EDIT LOCK
Quadruple speed edit mode (servo
locked)
locked)
.
Drop frame mode (factory default setting)
:
Non-drop frame mode