InStep 11-BA101 User Manual
CARE AND MAINTENANCE
Check fasteners after one hour of use; check all fasteners to make sure they are
Check fasteners after one hour of use; check all fasteners to make sure they are
secure. Adjust if necessary. Periodically check the stroller to ensure that it is in
good operating condition.
To adjust the stroller from pulling to the left or right (not rolling straight): Loosen
the front Q/R axle and point the front wheel in the opposite direction the stroller
is pulling, then tighten Q/R lever.
NOTE:
NOTE:
Sometimes it is a very slight adjustment to eliminate the pulling and
this step may need to be repeated.
To adjust front brake caliper:
If front caliper requires additional adjustment to
engage brake pads; first open Q/R brake lever, loosen the cable adjustment nut,
squeeze the brake pads together and while holding brake pads retighten cable
adjustment nut. Then close Q/R lever and check adjustment by squeezing hand
brake lever.
For micro adjustment, turn the front brake caliper’s adjusting sleeve counterclock-
For micro adjustment, turn the front brake caliper’s adjusting sleeve counterclock-
wise. Once the brake pads are adjusted to the desired distance from the rim,
tighten the lock ring. You will need to adjust the cable periodically since it is
normal for the cable to stretch from use.
To clean seat and canopy:
To clean seat and canopy:
If light cleaning is required, use a soft cloth with warm
water and mild soap then air dry. Do not put in washing machine. Do not put in
dryer. DO NOT BLEACH.
To clean frame: Wipe using a soft cloth with warm water and mild soap. Air dry.
To clean frame: Wipe using a soft cloth with warm water and mild soap. Air dry.
DO NOT USE
polish or abrasives.
WARNING:
If you have any questions concerning the safe use of
this product,please contact Pacific Cycle before using:
1.800.242.6110
1.800.242.6110
8am-5pm CST, Monday-Friday, or MAIL to:
Pacific Cycle Inc.
Pacific Cycle Inc.
4730 East Radio Tower Lane
Olney IL 62450
Tel: 1.800.242.6110
Tel: 1.800.242.6110
or visit us at www.instep.net
E-mail: info@instep.net
ONE YEAR LIMITED WARRANTY
Pacific Cycle warrants this product to be free of defective materials and
Pacific Cycle warrants this product to be free of defective materials and
workmanship for 1 year from the date of original purchase.
THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THIS
PRODUCT, AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTY. ANY
IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY
AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN
DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. This limited
warranty gives you specific legal rights and you may also have other rights
which may vary from state to state.
T
his warranty is extended only to the original consumer purchaser for
non-commercial use and does not cover tires or tubes, grips, brake shoes,
or other wear part, ordinary wear and tear, abuse, misuse, neglect, theft, or
damage due to accident.
PACIFIC CYCLE, INC., IS NOT RESPONSIBLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. THIS LIMITED WARRANTY DOES NOT COVER
ANY PERSONAL INJURIES, DAMAGE TO, OR, FAILURE OF THE PRODUCT OR
ANY OTHER LOSSES DUE TO ACCIDENT, ABUSE, MISUSE, ALTERATION, NEGLECT,
NORMAL WEAR AND TEAR, IMPROPER ASSEMBLY, IMPROPER FIT, IMPROPER
MAINTENANCE OR USE OF UNAUTHORIZED REPLACEMENT PARTS NOT
DESIGNED FOR THE PRODUCT.
To make claim under warranty, notification of such defect must be given to Pacific
To make claim under warranty, notification of such defect must be given to Pacific
Cycle, Inc at the address stated below. You will be instructed on how the product
or part needing replacement should be shipped postpaid to Pacific Cycle, Inc.
Operating Instructions
Run Around
™
11-BA101, 11-BA102...page 4
M3_single_Platform.indd 5
9/26/05 3:57:46 PM