Baby Trend E30FL0211U User Manual

loosening.  This combination seat belt does 

not require a locking clip (Fig. 19-1).

•   A lap/shoulder combination belt system 

with a latch plate that can slide freely along 

the belt is suitable for use with the Safety 

Seat if it includes a lockable retractor or if 

a locking clip is used to secure the lap belt 

into position and prevent loosening. Use 

the locking clip provided with the Safety 

Seat as instructed on page 42.   

style of seat belt.  This style of belt must be 

locked to prevent movement of the Safety 

Seat (Fig. 19-2 & 19-3).

Seat: 

The following seat belt systems can be used with the Safety Seat 

provided, that all of the other requirements prescribed in these 

instructions, including seat position, and all instructions provided 

by your vehicle’s owner’s manual are followed.

•   A lap belt that is manually adjusted and will 

remain tight while the vehicle is in motion is 

suitable for use with the Safety Seat.  Pulling 

the belt through the buckle after the buckle is 

fastened tightens this type of seat belt.  The 

center rear seat belt is most often this type of 

seat belt (Fig. 18-1).

•   A lap belt that cannot be lengthened once 

it is fastened is suitable for use with the 

Safety Seat.  These seat belts often have 

an automatic locking retractor that will 

allow the belt to be lengthened but once 

fastened, must be unbuckled and allowed 

to retract fully before allowing the belt to be 

lengthened again (Fig. 18-2).

•   A lap/shoulder combination seat belt with 

a latch plate that locks the lap belt into 

position is suitable for use with the Safety 

Seat.  Once this type of seat belt is fastened, 

the latch plate prevents the lap belt from 

Fig. 18-1

Fig. 18-2

Fig. 19-1

Fig. 19-2

Fig. 19-3