Baby Trend E30FL0211U User Manual

Slip the canopy stays through the sleeves on 

the canopy.
The canopy is attached by inserting the ends of 

the canopy plastic stays into the female fittings 

found on the inside of the handle hub.

The Adjustable Back Safety Seat includes a sliding back 

component that will adjust the height of the harness straps as the 

back is adjusted.

Failure to properly adjust the harness on your child 

increases the risk of death or serious injury in the event 

of a sharp turn, sudden stop or crash.  Please follow the 

instructions very closely to ensure that the harness is 

properly adjusted to fit your child at all times.  Your child will 

grow very rapidly!  Please check the fit of the harness every 

time you use the Safety Seat.

To adjust the seat back height, turn the moving 

back adjuster knob behind the seat clockwise 

to increase the seat back height and counter 

clockwise to decrease the seat back height. 

Each half turn will raise or lower the slots 1/2”.
The proper height of the harness straps is  

even with or just below your child’s shoulders.
Remove the Safety Seat from the Base and 

rotate the Carry Handle to the non rocking 

position.  Place your child in the Safety Seat 

such that your child’s bottom is all the way to 

the rear and bottom of the seat. (See Fig. 35-2)  

Rotate the knob behind the seat back to raise 

or lower the moving seat back and harness 

straps.  Knob must remain in vertical position 

after adjustment. (Fig. 29-1)  The Harness 

Straps must be even with or just below the 

child’s shoulders. (Fig. 29-2)  

DO NOT use the 

Safety Seat with the Harness adjusted above 

the child’s shoulders as the child will not be 

held securely in a sharp turn, sudden stop,  

or crash.
Fixed Back Safety Seat 

The fixed seat back version of the Safety 

Seat features three height adjustments for the 

harness shoulder straps.  

Knob handle must 

be vertical

Fig. 29-1

Fig. 29-2