Adams CFW 150 User Manual
Checkweighing facility can be set up during Weighing or Parts Counting by entering
values as Low or/and High Limits keyed in by the user. The limits are displayed in
kg or pcs respectively.
values as Low or/and High Limits keyed in by the user. The limits are displayed in
kg or pcs respectively.
Checkweighing during Weighing
Checkweighing during Parts Counting
To disable the Check-Weighing function enter zero into both limits by pressing
the [Func/C] key when the current limits are shown then pressing [Zero/Enter]
to store the zero values.
the [Func/C] key when the current limits are shown then pressing [Zero/Enter]
to store the zero values.
6.5 ACCUMULATED
TOTAL
•
The scale can be set to accumulate manually by pressing the
[Print/M+] key. See the PARAMETER Section for details of setting
the Parameter "
[Print/M+] key. See the PARAMETER Section for details of setting
the Parameter "
F5 PRT". The accumulation function is only available
when weighing. It is disabled during parts counting.
•
The weight displayed will be stored in memory when the [Print/M+]
key is pressed and the weight is stable.
key is pressed and the weight is stable.
•
The display will show "
ACC 1" and then the total in memory for 2
seconds before returning to weighing. If the optional RS-232
interface is installed the weight can be output to a printer or PC.
interface is installed the weight can be output to a printer or PC.
@Adam Equipment Company 2006
14