Avaya 15-601083 User Manual
3701 Phone User Guide
Page 29
IP Office 3.2
[15-601083] Issue [1b] (1 June 2006)
Menu: System
Registration Code
The phone can be manually registered on up to 5 different DECT systems. Before you can make a call
via the DECT system, the phone has to be registered to the system. A system ID and registration code
are necessary for the registration process. Ask the system administrator for the valid registration code.
When the phone is not subscribed to the system the display will show
via the DECT system, the phone has to be registered to the system. A system ID and registration code
are necessary for the registration process. Ask the system administrator for the valid registration code.
When the phone is not subscribed to the system the display will show
”
Please, subscribe
”
.
Note
This is for information only. Please contact your system administrator to register the phone.
All settings in this chapter are started by pressing the softkeys:
Menu
System
OK
Registering the Telephone to the DECT System
Subscription
OK
>Subscribe HS<
OK
PABX-PIN OK -
Subscribe
OK
or
Use PARK-Code
PARK OK
or
Cancel
OK
The following entries must be made when logging on:
PABX-PIN
: this code is used to get access to the DECT System.
Use PARK-Code
: a system ID should only be entered if you are at a location where two DECT systems
overlap.
Enter name
: give the name of the DECT system to which you are registering. This will be shown on the
idle display. For information concerning the entry of characters, see Entering Characters/Names.
Internal No.
: the phone number, assigned to your DECT phone can be entered here (ask your system
administrator for the phone number).
Selecting the DECT System
Subscription
OK
select a System Options
Select
OK
If the phone has been registered to several DECT systems, then you can select which one the phone is
to use. Select the system via the arrow keys before confirming
to use. Select the system via the arrow keys before confirming
”
Select
”
. By choosing Options
Select
,
the function automatic search is disabled. The selected system is shown in the idle display.