SterlingTek A0551797 User Manual

 

Sterling central chilling stations are designed to provide safe and 
reliable operation when installed and operated within design 
specifications, following national and local safety codes. 

 

To avoid possible personnel injury or equipment damage when 
installing, operating, or maintaining this equipment, use good 
judgment and follow these safe practices: 

 

þ  Only PROPERLY TRAINED personnel familiar with the 

information within this manual should work on this equipment. 

þ  Follow all local SAFETY CODES. 
þ  Wear SAFETY GLASSES and WORK GLOVES. 
þ  Disconnect and/or lock out power before servicing or 

maintaining the chiller. 

þ  Use care when LOADING, UNLOADING, RIGGING, or 

MOVING this equipment. 

þ  Operate this equipment within design specifications. 
þ  OPEN, TAG, and LOCK ALL DISCONNECTS before 

working on equipment. Sterling recommends following OSHA 
Lock-Out/Tag-Out Standard 29 CFR 1910.147. 

þ  Make sure the unit is properly GROUNDED before switching 

power on. 

þ  When welding or brazing in or around this equipment, be sure 

VENTILATION is ADEQUATE. PROTECT adjacent 
materials from flame or sparks by shielding with sheet metal. 
An approved FIRE EXTINGUISHER should be close at hand 
and ready for use if needed. 

þ  Do not jump or bypass any electrical safety control. 
þ  Do not restore power until all tools, test equipment, etc. and 

chiller and related equipment have been removed.