Mitsubishi Electronics A1SD75M1/M2/M3 User Manual
12 - 13 12 - 13
MELSOFT
12. USEFUL FUNCTIONS
12.3.2 Copying the data on a start block basis (Start block copy)
PURPOSE
Using the start block copy function, copy the start block to the other blocks.
The start block copy function is performed to copy data between blocks in the
same axis.
Note that if AD75P# is selected in Change AD75 model, the start block copy
function cannot be performed.
The start block copy function is performed to copy data between blocks in the
same axis.
Note that if AD75P# is selected in Change AD75 model, the start block copy
function cannot be performed.
BASIC OPERATION
1. Display the start block data edit main screen (refer to Section 9.3) of the axis
whose data will be copied.
2. Click the [Edit]
→ [Start block copy] menu.
3. Set the block No. of the copy source and the block No. of the copy destination.
4. Click the "OK" button.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Copy source block No.
Choose the block No. of the copy source.
Copy destination
Set the block No. of the copy destination.
Two or more blocks can be set at the same time.
Two or more blocks can be set at the same time.
"OK" button
Click this button to copy the data.