Mitsubishi Electronics QD75D User Manual
12 - 98
MELSEC-Q
12 CONTROL SUB FUNCTIONS
[3] Setting method
To use the "stop command processing for deceleration stop function", set the
following control data in a sequence program.
The set data are made valid as soon as they are written to the buffer memory.
The PLC ready signal [Y0] is irrelevant.
Setting item
Setting
value
Setting details
Buffer memory address
Cd.42
Stop command
processing for
deceleration stop
selection
processing for
deceleration stop
selection
Set the stop command processing for
deceleration stop function.
deceleration stop function.
0: Deceleration curve re-processing
1: Deceleration curve continuation
1907
For details of the setting details, refer to "Section 5.7 Control data list".