StorageTek 9714 User Manual

Operator Panel

2-2

Eighth Edition

95698

  

Initiates the download from the diskette.  The IPL sequence

consists of PROM tests, boot tests, and machine initialization.

DESIGNED FOR CSE USE ONLY! NOT an operator activity.

Initiates a dump.

Lights when the LSM requires service.  The display indicates

"INOP" and the fault symptom code.

Solid light until the functional code is active, then flashes on and

off every second while the PRC card is active.

Used to set SCSI address and cleaning cartridge usage.

Used to unlock the CAP.  When the display shows "ONLINE CAP

LOCKED," press EXECUTE to send a message to the robot to

unlock the CAP.  Also used to set SCSI address and cleaning

cartridge usage.

Displays machine status and menu information.  It also prompts

the operator to perform certain functions.
When the display shows "ONLINE - PRESS EXE TO UNLK CAP,"

and you want to unlock the CAP so that you can place a cartridge

into it, press EXECUTE to send a message to the robot to unlock

the CAP.
When the display shows "ONLINE CAP UNLK DISABLD," the CAP

is locked by the host.  To open the CAP for entering cartridges,

enter the "open" command from the system console.  The display

will change to "ONLINE PRESS EXECUTE TO UNLOCK CAP."

Once you have pressed EXECUTE, the display will change to

"ONLINE CAP UNLK PENDING."  The robot will then unlock the

CAP and the display will show "ONLINE CAP UNLOCKED."
When the display shows "ONLINE CAP UNLOCKED," and you

want it locked, open and close the CAP.  The display will show

"ONLINE CAP LOCKED."

C61010

(OPERATOR PANEL DISPLAY)

Flashes whenever I/O is performed across a host interface or CSE

port.