StorageTek 9714 User Manual
95698
Eighth Edition
2-5
Setting the SCSI Address
Figure 2-3. Setting the SCSI Address
Test Screens
Next Sequence
of Tests Begin
Execute BT0.X
Download BT0.X
Press Execute to
Enter 0 as ID
Press Execute to
Enter 7 as ID
EXECUTE
PRESSED
IPL
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
MENU
PRESSED
MENU
PRESSED
MENU
PRESSED
MENU
PRESSED
C61012
Exit to IPL
Press Menu
Until This
Screen
Appears
Press Menu
Until This
Screen
Appears
Press Menu
Until This
Screen
Appears
6X
Press Execute to
Store Cfg in NVR
EXECUTE
PRESSED
MENU
PRESSED
*
*
Off/On Bus options for drives 1-5 only appear if
those drives are installed and configured and after
the preceding drive has been assigned an ID.
After pressing the execute softkey, there will be a
momentary delay before this screen appears.
j
Press Execute to
Enter Frame Type
*
Press Execute to
Enter SCSI ID
When more than one
drive is installed, pressing
execute returns you to the
Off/On Bus menu option
until all drives have
been assigned an ID.
14X
Press Execute if
Drv X Off Bus
Press Execute if
Drv X On Bus
Press Execute if
Drv X is ID 0
Press Execute if
Drv X is ID 15
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
MENU
PRESSED
MENU
PRESSED
MENU
PRESSED
MENU
PRESSED
MENU
PRESSED
Press Execute to
Ent Drv Cfg Info
*
*
Drv X: XXX Bus
SCSI ID = XX
SCSI Host
SCSI ID = X
MENU
PRESSED
MENU
PRESSED
j
Pressing menu accesses screens showing off/on
bus and SCSI ID information for each drive
installed and configured.