3com WX1200 3CRWX120695A User Manual
312
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
clear radio-profile
Removes a radio profile or resets one of the profile’s parameters to its
default value.
default value.
Syntax —
clear radio-profile name [parameter]
name
— Radio profile name.
parameter
— Radio profile parameter:
beacon-interval
countermeasures
dtim-interval
frag-threshold
max-rx-lifetime
max-tx-lifetime
preamble-length
rts-threshold
service-profile
For information about these parameters, see the set radio-profile
commands that use them.
commands that use them.
Defaults — If you reset an individual parameter, the parameter is
returned to the default value listed in Table 72 on page 416.
returned to the default value listed in Table 72 on page 416.
Access — Enabled.
History —Introduced in MSS Version 3.0. countermeasure parameter
added in Version 4.1. Version 4.2 removes the long-retry and
short-retry parameters that no longer apply to radio profiles.
added in Version 4.1. Version 4.2 removes the long-retry and
short-retry parameters that no longer apply to radio profiles.
Usage — If you specify a parameter, the setting is reset to its default
value. The settings of the other parameters are unchanged and the radio
profile remains in the configuration. If you do not specify a parameter,
the entire radio profile is deleted from the configuration. All radios that
use this profile must be disabled before you can delete the profile.
value. The settings of the other parameters are unchanged and the radio
profile remains in the configuration. If you do not specify a parameter,
the entire radio profile is deleted from the configuration. All radios that
use this profile must be disabled before you can delete the profile.
Examples — The following commands disable the radios using radio
profile rp1 and reset the beaconed-interval parameter to its default
value:
profile rp1 and reset the beaconed-interval parameter to its default
value:
WX4400# set radio-profile rp1 mode disable
WX4400# clear radio-profile rp1 beacon-interval
success: change accepted.