3com WX1200 3CRWX120695A User Manual
display ap global
345
See Also
display ap global
Displays connection information for Distributed MAPs configured on a
WX.
WX.
Syntax —
display ap global [ap-number | serial-id serial-ID]
ap-number
— Index value that identifies the MAP on the WX.
serial-id
serial-ID
— MAP access point serial ID.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Version 6.0 removed the dap
option.
option.
Usage — Connections are shown only for the Distributed MAPs that are
configured on the WX switch from which you enter the command, and
only for the Mobility Domain the switch is in.
configured on the WX switch from which you enter the command, and
only for the Mobility Domain the switch is in.
To show information only for Distributed MAPs that have active
connections, use the display ap connection command.
connections, use the display ap connection command.
Table 65 Output of display ap connection
Field
Description
AP
ID assigned to the Distributed MAP.
If the connection is configured on another WX switch, this
field contains a hyphen ( - ).
field contains a hyphen ( - ).
Serial Id
Serial ID of the Distributed MAP.
AP IP Address
IP address assigned by DHCP to the Distributed MAP.
WX IP Address
System IP address of the WX switch on which the MAP has
an active connection. This is the switch that the MAP used
for booting and configuration and is using for data transfer.
an active connection. This is the switch that the MAP used
for booting and configuration and is using for data transfer.