3com WX1200 3CRWX120695A User Manual
374
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
set ap boot-
configuration
switch
configuration
switch
Specifies the WX a Distributed MAP contacts and attempts to use as its
boot device.
boot device.
Syntax —
set ap ap-number boot-configuration switch
[switch-ip ip-addr] [name name dns ip-addr] [mode {enable |
disable}]
ap
ap-number — Index value that indentifies the MAP on the WX.
switch-ip
ip-addr — The IP address of the WX switch the Distributed
MAP should boot from.
name
name — The fully qualified domain name of the WX the
Distributed MAP should boot from. When both a name and a
switch-ip are specified, the MAP uses the name.
switch-ip are specified, the MAP uses the name.
dns
ip-addr — The IP address of the DNS server used to resolve the
specified name of the WX switch.
mode
{
enable
|
disable
} — Enables or disables the MAP using the
specified boot device.
Defaults — By default MAPs use the process described in “Default MAP
Boot Process”, in the
Boot Process”, in the
to boot from a WX, instead of using a manually specified WX.
Examples — Enabled.
History —Introduced in MSS 4.2. Version 6.0 removed the dap option.
Usage — When you specify a boot WX for a distributed MAP to boot
from, it boots using the process described in “MAP Boot Process Using
Static IP Configuration”, in the
from, it boots using the process described in “MAP Boot Process Using
Static IP Configuration”, in the
.
When a static IP address is specified for a Distributed MAP, there is no
preconfigured DNS information or DNS name for the WX the Distributed
MAP attempts to use as its boot device. If you configure a static IP
address for a Distributed MAP, but do not specify a boot device, then the
WX must be reachable via subnet broadcast.
preconfigured DNS information or DNS name for the WX the Distributed
MAP attempts to use as its boot device. If you configure a static IP
address for a Distributed MAP, but do not specify a boot device, then the
WX must be reachable via subnet broadcast.
Examples — The following command configures Distributed MAP 1 to
use the WX with address 172.16.0.21 as its boot device.
use the WX with address 172.16.0.21 as its boot device.