Sennheiser DW Pro1/Pro2 User Manual
17
Putting the headset system into operation
왘
increase the volume until the HEADSET LED
goes off.
The headset switches to standby mode.
Left
Right
5 s
5
4
6
Testing the headset system in
Phone
mode and
adjusting it
Testing the telephone connection
When
PC
lights up white):
왘
on the base station.
The base station is set to
Phone
mode and the LED of the PHONE
button
lights up white.
왘
Press either the LINK button
on the headset or the PHONE button
lights up blue and the HEADSET LED
flashes
blue.
5
4
왘
Lift the handset (If a handset lifter is connected, it automatically lifts
the handset).
The system is correctly connected if you can hear a clear dial tone and
if the other party can hear you at a comfortable level.
the handset).
The system is correctly connected if you can hear a clear dial tone and
if the other party can hear you at a comfortable level.
If the audio signal/dial tone is disturbed, adjust the audio signal (see
page 18). If the other party cannot hear you well, adjust the micro-
phone sensitivity (see page 18).
page 18). If the other party cannot hear you well, adjust the micro-
phone sensitivity (see page 18).